 |
Shaft
Puller and Accessories |
|
 |
The
Pool Tool No. 109 Universal Puller Kit includes the following
five tools:
No. 100 Shaft Puller allows for easy removal
of seal shaft extensions from keyed shaft pump motors. This
time saving tool can be used on Sta-Rite, H&F, Pac Fab,
American Products, Premier, Aqua Flo and Anthony motor seal
shafts.
No. 102 Purex Impeller Gauge sets Purex A-Series
Impellers with the correct impeller to pump clearance during
installation.
No. 106 Jacuzzi Adapter adapts the No. 100
Shaft Puller for use on Jacuzzi U.L.S.B. Series pumps.
No. 107 Swim-Quip Adapter adapts the No.
100 Shaft Puller for use on Swim-Quip seal shafts.
No. 108 Purex Impeller Puller is indispensable
for removing Impellers on Purex A-Series pumps. New design
will not bend impellers and will work even if the impeller
retaining set screws are stripped or frozen in place. |
|
Rail
Puller |
|
 |
For
hard to remove grab rails or ladders
Forged steel puller bolts around Grab Rail
or Ladder.
Just use a 7/8” open end wrench and tighten
nuts evenly. The puller will lift the rail out of
the anchor socket. |
|
|
Broken
or Missing Weir Blades? |
|
|
Solution:
Convert your U-3 type skimmer into a circular weir.
SKIMMER WEIR CONVERSION
Adapter snaps into skimmer basket, allowing the
use of a circular weir. |
|
T-Wrenches |
|
|
Handy,
long lasting T-Handle Hex Wrenches for the pool and spa repair
and service trades.
• Continuous one piece construction with integral
loop handle, provides maximum torque even in areas that are
hard to reach.
• Made to close tolerances of high quality chrome nickel
alloy steel.
• Hardened and tempered by a special martempering process
for maximum strength.
• Long 6” length for accessing hard to reach set
screws. This extra long length makes it possible to grind
wrench down to a new edge many times.
Available in two sizes: 1/8” T-Wrench fits all standard
seal shaft extensions and is ideal for the new style Purex
and Hydrotech pool lights. No. 114 5/32”
T-Wrench fits Jacuzzi seal shaft extensions and is ideal for
the old style Purex pool lights. No. 115 |
|
SPA
Jet Cleaner |
|
 |
Cleans
out hard to reach spa jet orifices.
• Specially designed barbed end to make cleaning
clogged jets easy.
• 3 feet long to reach any spa jet orifice.
• Will not corrode. |
|
|
Purex
Rotor Installer |
|
|
Don’t
get stuck at the last 1/2 inch!
This handy tool presses the rotor back into the filter housing
so the backwash handle can be installed.
Use with the Purex Rotor Puller to make leaky filter repair
a snap!
|
|
Rotor
Valve Puller |
|
|
Repair
stuck or leaking rotor valves.
•
Easily removes brass and plastic rotor valve
rotors so port seals can be replaced or lubricated.
• This versatile tool can be used to service
C.H.D., Purex, and Pentair rotor valves.
• The cylindrical shape of this tool distributes
pressure evenly around the entire rotor valve to tank
mating surface to avoid slipping or otherwise damaging
the rotor valve housing.
• This time-saving easy to use tool more than
pays for itself on the first repair job!
• Like all Pool Tools, the Rotor Valve Puller
is guaranteed for a lifetime of service.
• Made in the USA of zinc plated and stainless
steel.
• Threaded rod adapter is used for plastic rotors. |
|
|
'O'
Ring Pick |
|
 |
An
extremely handy inexpensive little tool!
• Makes removal and installation of “O”
rings a real snap.
• Will not damage “O” ring groove.
• Spring steel. Will not bend or break.
|
|
Open
End Wrench |
|
|
9/16”
offset Wrench for those hard-to-reach spots.
• Made in the USA of chrome plated forged alloy steel.
• Excellent for working on
• Fully guaranteed. Purex A-series pumps. |
|
Obstruction
Wrenches |
|
|
2
Piece SAE Obstruction Wrench set.
• “Half moon” shape for accessing hard to
reach places.
• Drop forged, heat treated, chrome plated steel for
a long corrosion resistant life.
• Fits all popular pool & spa nut and bolt sizes:
7/16”, 1/2”, 9/16” and 5/8”. |
|
Main
Drain Suction Mat |
|
 |
NEW!
Creates more suction at the skimmer!
• The Main Drain Suction Mat covers main drain
to create more suction at the skimmer for easier vacuuming.
Use net to push mat into place and to catch hook for
easy removal.
• Made of flexible PVC with a stainless steel
hook. |
|
|
Discharge
Hose Coupler |
|
|
Quick
and easy way to connect discharge hose.
• Tapered body and compression ring prevents leaks.
• No need for hose clamps.
• Ideal for adding extra lengths of hose. |
|
Magnetic
Poles Tips |
|
|
Pick
up bobby pins and other metal objects that are too small to
be scooped up by your net and that would otherwise cause ugly,
hard-to-remove rust stains.
• Two styles to choose from: Standard 112-S or Professional
112-P
• Durable plastic with a powerful built in ceramic magnet.
Will not corrode.
• Bright orange color allows pool men to legally carry
poles that extend beyond the end of their pick-up trucks.
|
|
Anti-Electrolysis Weight |
|
|
Anti-Electrolysis Weight was designed to stop metal erosion, and plaster discoloration due toElectrolysis. Keeps skimmer basket in place. Bolts permanently inside or outside any skimmer basket. |
|
